How to maintain the fiber laser cutting machine in summer
The temperature rises in various places during the summer, and many fiber laser cutting equipment generates heat while in use, causing some failures. As a result, in order to prevent the fiber laser cutting machine from malfunctioning during the summer, we must pay close attention to its maintenance and repair. We have summarized five major points here.
1. Avoid condensation
When summer arrives, the temperature naturally rises, the humidity rises, and the frequent rainfall and humid environment easily cause internal condensation of the aluminum laser cutting machine. Laser maintenance focuses on preventing aluminum laser cutting machine condensation. Don’t let a minor flaw ruin your aluminum laser cutting machine.
Separate water cooling controls the fiber laser source and the fiber laser cutting head. It is recommended that the user set the laser to a low temperature, the water temperature to approximately 26 degrees, and the cutting head and optical fiber temperature to approximately 30 degrees (depending on the temperature and humidity values). In summer, strictly adhere to the sequence of beginning and ending.
Please keep in mind:
Wet and hot weather will cause the laser power supply and all parts of the laser equipment to become wet or dewed, resulting in a variety of failures and seriously affecting users’ normal production.
The fault caused by improper maintenance for the reasons stated above is not covered by the standard warranty.
2. Maintain the cooling system and cooling water of the laser steel cutting machine
The cooling system working pressure of the laser steel cutting machine increases as the temperature rises in the summer. It is recommended that the internal pressure of the water cooler be checked and maintained prior to the high temperature. The deterioration rate of the cooling water will increase in the summer due to the high temperature. We recommend that customers use regular distilled or deionized water to clean the scale in the water tank on a regular basis and replace the water and filter (the replacement cycle should not exceed 15 days in summer) to avoid scale adhesion in the laser source and pipelines, which will affect the flow of cooling water and cause high temperature alarms. Please clean up the scale under the supervision of a professional.
3. Rail maintenanceof cnc fiber laser cutting machine
To ensure that the transmission part of the fiber laser cutting equipment is lubricated and free of debris, the guide rails of the cnc fiber laser cutting machine should be cleaned on a regular basis to remove dust and other debris. Clean and lubricate the cnc fiber laser cutting machine on a regular basis to ensure that it can be accurately positioned during operation, achieve more accurate cutting, and improve product quality.
4. Control cabinet maintenance of laser metal cutting machine
Because the dust of the laser metal cutting machine is primarily metal powder, we recommend that the power be turned off on a regular basis to clean the dust in the electrical cabinet of the laser metal cutting machine and to inspect the cooling fan’s operation.
5. Fan cleaning of industrial laser cutting machine
Long-term use of the fan in the industrial laser cutting machine will cause a lot of solid dust to accumulate in the fan, causing the fan to make a lot of noise and making it difficult to exhaust and deodorize. When the fan’s suction power is insufficient and the exhaust smoke is not smooth, the fan needs to be cleaned.
Overall, paying attention to the maintenance and repair of the fiber laser cutting machine is critical; this can help extend the use lifetime of the fiber laser cutting machine, which we recommend all users keep in mind.